Hydro Systems Designer Series includes five styles of tubs of various sizes and shapes by environmentally conscious North American bath ware producers Hydro Systems. Available in 14 colors, these customisable tubs are built of a fibreglass reinforced acrylic or Gelcoat and include a pre-wired pump and no-skid bottom. All Hydro Systems Designer Series tubs are available as tub only, Thermal Air, Whirlpool or combo. All whirlpool tubs come with Soft Touch on/of controls.

Hydro Systems Designer Series is a line of customizable rectangular, oval, corner, freestanding and walk-in bathtubs.

• Rectangular dimensions: 54" x 30" to 86" x 50"/ 82" x 64"
• Oval dimensions: 60" x 36" to 78" x 48"
• Corner dimensions: 55" x 55" to 69"L x 69"
• Freestanding dimensions: 60" x 38" to 72"L x 44"
• Walk-in dimensions: 30" x 40"
• Max. operating gal.: 40 - 295

Installation tips:

• Tubs that are mounted against walls should be ordered with a tile flange on each side that will be against a wall.
• For drop-in the finished height of the deck where the tub will sit must equal the dimension from the trimmed edge of the tub to the floor at the drain end of the tub plus 1". The deck must be level front to back and side to side.
• For tubs installed in a three wall enclosure, the tub will need a rough opening the same size as its overall dimensions.
• Tubs must be set in slow-setting mortar without gravel.