Cheviot
Drop-In is a line of three sizes of rectangular freestanding cast iron
bathtub.
Rectangular
dimensions:
59" x 27 1/2"
to 72" x 32"
Operating
gal.: 38
Cheviot Drop-In is
a luxurious line of three sizes of European-built freestanding rectangular
bathtubs built with brand-new traditional-style porcelain over the highest
quality cast-iron and designed to drop in to any sort of base.
Cheviot Drop-In tubs feature a white porcelain enamel interior. The
exterior of the tub comes unfinished. There are no faucet drilling and
faucet and drain are sold separately.
Cheviot Drop-In tubs feature the ability to fit in a three wall alcove
Cleaning and Installation Instructions:
Clean Cheviot
Bathtubs using liquid soap and a soft cloth. Products such as Vim,
Fantastic, Spic and Span and Mr. Clean must not be used as they
may damage the finish.
Tub and pedestal
are separate units. Place the pedestal onto the tub and secure by
tightening the four bolts provided through the slots on the bottom
of the bath. Do not tighten the bolts down completely until you
have manoeuvred the pedestal into the "best fit" position.
It is normal
if there is a slight gap between the tub and pedestal. To eliminate
the gap place a bead of silicone adhesive around the joint. This
will secure the two pieces together and to give a "finished" look.
Once the siliconing has been done leave the tub for 24 to 48 hours
to allow it to cure properly.
Rough-in dimensions
may vary +/- ½" and are subject to change.