Cheviot Traditional is a single-size line of ovular pedestal cast iron bathtubs.
  • Dimensions:
    61” x 30”
  • Maximum operating
    gal.: 61
Cheviot Traditional is a series of luxurious European-built freestanding ovular pedestal bathtubs built with brand-new traditional-style porcelain over the highest quality cast-iron.

Cheviot Traditional bathtubs are available with 3 3/8” centre faucet holes on the tub wall, with no faucet holes, or with rim mount faucet holes.

Cheviot Traditional bathtubs feature a white porcelain enamel interior and are available in a range of custom exterior colours.

Faucet and drain sold separate.

Cleaning and Installation Instructions:
  • Clean Cheviot cast iron Bathtubs using liquid soap and a soft cloth. Products such as Vim, Fantastic, Spic & Span and Mr. Clean must not be used as they may damage the finish.
  • Tub and pedestal are separate units. Place the pedestal onto the tub and secure by tightening the four bolts provided through the slots on the bottom of the bath. Do not tighten the bolts down completely until you have manoeuvred the pedestal into the "best fit" position.It is normal if there is a slight gap between the tub and pedestal. To eliminate the gap place a bead of silicone adhesive around the joint. This will secure the two pieces together and to give a "finished" look. Once the siliconing has been done leave the tub for 24 to 48 hours to allow it to cure properly.
  • Rough-in dimensions may vary +/- ½” and are subject to change.

Cheviot Traditional Cast Iron Bathtub

Phone: (866) 455-0720 | sales@iTubGallery.com

iTub Gallery | Phone: (866) 455-0720 | sales@iTubGallery.com